Honeywell FS20X Fire Sentry Detector Not included Copper free aluminum with 3/4in NPT entries FM, cFM for Class I, Div 1, Groups A,B,C,D; Class II, Div 1, Groups E,F,G; Class III

The Honeywell FS20X Fire Sentry Detector is the latest generation high technology multiSpectrum (UV/Dual IR/VIS) fire and flame detector, which is part of the FSX family of advanced technology electro-optical flame detectors. Based on the foundation of the highly successful and reliable Fire Sentry SS4 detector, the Fire Sentry FS20X detector represents a quantum leap in integrating Infrared and Ultraviolet sensing technologies. The Fire Sentry FS20X is a Multi-Spectrum and UV/Dual IR/VIS fire and flame detector with a proven UV solar-blind sensor. The Fire Sentry FS20X exhibits faster false-alarm free response to fires over a wider temperature range and with a much longer detection range compared to conventional UV/IR detectors.

The Fire Sentry FS20X detector uses advanced patented algorithms for signal processing and fire and flame analysis is designed to alarm to all types of fires in all industrial environmental conditions. If the detector's UV signal is degraded due to heavy smoke or a contaminated lens, the Fire Sentry FS20X's patented* WideBand IR™, Near Band IR and Visible sensors will still alarm to fire but at a reduced sensitivity and slower response time.

Dual microprocessors provide a high level of fail-safe operation combined with fast and reliable performance. The Master Microprocessor performs high-speed digital sampling and signal processing calculations; while the slave microprocessor handles various sensor data, performs communications, self-diagnostics and provides interface versatility; and additional memory for storing Event Log and FirePic™ data.

The Fire Sentry FS20X detector has a detection range in excess of 200 feet (very high sensitivity setting) for the detection of a one square-foot Heptane reference fire and has a cone of vision greater in volumetric coverage than most UV/IR detectors. This means fewer detectors can be used as compared to other manufacturers' detectors.

Honeywell FS20X fire sentry detectors help you comply with NFPA fire detection standards for industrial, storage, manufacturing, processing and other sensitive locations

Applications for the FS20X include:

• Refineries and Oil Production Facilities
• Off-Shore Platforms
• Turbine/Compressor Enclosures
• Acetylene Processing and Storage
• Oil & Gas Pipelines and Pumping Stations
• LNG/LPG Loading & Unloading Facilities
• Natural Gas and CNG Plants
• Ethanol, Methanol, and IPA Production and Storage
• Crude Oil and Gasoline Storage and Tank Farms
• Aircraft Hangars
• Hydrogen Plants and Storage
• Paint & Solvent Storage
• Chemical Production, Storage, and Loading Facilities
• Power Plants
• Silane Gas Storage

Additional features and benefits include:

• Built-in RS-485 modBus communication
• Built-in non-isolated 4-20 mA analog output (sink or source)
• Alarm, fault and fire verification relays
• Automatic optical path and electronic self-test
• Widest operating temperature range
• Patented* electronics module for components protection with plug-in terminations for easy field installation
• Two ¾" NPT OR 25mm conduit entries
• Low power consumption
• High RFI and EMI immunity
• FM approved
• Detects hydrocarbon and non-hydrocarbon fuel fires in all environmental conditions
• Arc welding immunity
• False alarm rejection for all environmental conditions
• Minimal maintenance for trouble-free operation
• PC software and Interface Module (FSIM) for fault diagnostics real-time graphs (RTGs), and downloading of FirePics™ and event log
• Suitable for a wide variety of applications