Contact us：info@instrustock.com

Home/Inertial Sensors/Jewell Instruments D711 Tiltmeter Wide range (±70%) RS232 (serial)

Jewell Instruments D711 Tiltmeter Wide range (±70%) RS232 (serial)

CODE:

Write a review

In stock

Output:

Gain:

Delivery

Payment options

Our advantages

— 12 months warranty
— SMS notification
— Return and exchange
— Different payment methods
— Best price

Options
Description
Documents

Column filling

Sort by Price	Sort by Availability	Sort by CODE	Sort by Output	Sort by Gain
Contact us for a price	In stock	D711-A-S	Output: RS232 (serial)	Gain: High gain (±0.5%)
Contact us for a price	In stock	D711-A-D	Output: RS422 (differential serial)	Gain: High gain (±0.5%)
Contact us for a price	In stock	D711-B-S	Output: RS232 (serial)	Gain: Mid range (±5%)
Contact us for a price	In stock	D711-B-D	Output: RS422 (differential serial)	Gain: Mid range (±5%)
Contact us for a price	In stock	D711-C-S	Output: RS232 (serial)	Gain: Wide range (±70%)
Contact us for a price	In stock	D711-C-D	Output: RS422 (differential serial)	Gain: Wide range (±70%)

Precision biaxial tiltmeters
Angular range:
- ±0.5° (high gain)
- ±5° (mid range)
- ±80° (wide angle)
Resolution:
- 1 µradian (High-Gain)
- 10 µradian static (Mid-Range)
- 4 arc seconds (Wide Angle)
NEMA 4X protection
Resits corrosion
Floor mount
RS232 and RS422 outputs
Operating temp: -13 to 158°F (-25 to 70°C)
0.5 inch (12.7mm) holes in each corner to fit over SST studs

The Jewell Instruments D711 Tiltmeter is a precision digital instrument packaged in a weatherproof housing. Its NEMA 4X designation (IP65) means that it is unaffected by continuous exposure to moisture and wet weather, and that it resists corrosion that can occur in wet conditions. RS232 and RS422 output versions are both available. The powerful firmware command set enables the user to control output data rates, data formats, sample averaging, and other useful parameters. All units are shipped with our graphical ZAGI user interface software for Windows computers.

The D711 bolts or clamps to any surface and is well suited for areas of heavy traffic or vibration. The 0.5-inch (12.7mm) holes in its three corners fit over threaded stainless steel studs, provided with each order. The tiltmeter is double-nutted to the studs after they are anchored in the mounting surface. Each tiltmeter comes with a hookup cable and power supply for quick operation using your PC.

Jewell Instruments D711 Tiltmeter Wide range (±70%) RS232 (serial)

Features