Wilcoxon Sensing Technologies REF2510R ReferenceMate Monitoring Kit
- — 12 months warranty
- — SMS notification
- — Return and exchange
- — Different payment methods
- — Best price
Features
- Operating frequencies (user selectable):
- 61.4Hz
- 100.0Hz
- 159.2Hz
- 1.0g (9.81m/s2) acceleration output
- 6061 aluminum case
- 1/4-28 female mounting thread
- 0 to 8.8oz (250 grams) load range
- ≤3sec ramp up time
- Thermoplastic rubber protective boot
- IP54 protection rated
The Wilcoxon Sensing Technologies REF2510R ReferenceMate monitoring kit enables users to verify sensor performance and the integrity of the cabling between the sensor and the online system easily and efficiently. The built-in reference accelerometer assures that a 1g test level is maintained for sensors weighing up to 250 grams. Frequency of operation (61.4Hz, 100Hz, and 159.2Hz) and measurement type (peak/RMS) are user selectable with the push button interface. All selections retained after powering off the unit. Crossover frequencies allow for easy velocity verification. LEDs notify the user when battery condition falls below operational levels or if the unit is overloaded. For calibration verification, reference test points are provided to verify the output of the internal sensor.
Frequency of operation and measurement types:
- 61.4Hz: for imperial measurements, where 1g is equal to 1in per second (ips), ideal for use with velocity sensors
- 100Hz: to confirm accelerometer performance at the same reference frequency used by most manufacturers
- 159.2Hz: for metric measurements, where 1g is equal to 9.81m/sec2 and 9.81mm/sec
The REF2510R is manufactured in an approved ISO 9001 facility.
